After a few posts with photos of my desk, I have received a few questions and requests to do a post regarding my desk setup, so here is a quick desk tour.
As can be seen in the photos above I run two 27-inch monitors, for a secondary monitor I use the Dell SE2717H, a 75Hz 1080P FreeSync monitor, and for a primary display, I use the Dell S2716DG, a 144Hz 1440p G-Sync monitor.
The full specs of the PC can be found in a previous post here, with only a few minor changes since then that I will cover now.
The first change made was replacing the standard plastic backplate of the Corsair H150i Pro with an all metal one, as can be seen in the image below:
The plastic backplate that came with the H150i never felt completely stable, and with the new metal backplate, the whole mounting feels much more robust. This backplate is available from Amazon. While replacing the backplate, I also replaced the thermal paste that came pre-applied with the AIO cooler with Thermal Grizzly Kryonaut. This process resulted in the CPU temperatures dropping by approximately 2-3°C.
The next thing that changed was the addition of a Corsair Lighting Node Pro and RGB Strips, as well as a storage upgrade with an additional 4TB Western Digital Blue drive, total storage is now 17.5 TB consisting of 500GB NVMe storage, 1TB SSD storage and 16 TB spinning disk storage of which 4 TB is accelerated with 32GB Intel Optane Memory.
As the case front panel, Corsair AIO and the Corsair Lighting Node Pro requires USB 2 headers and my motherboard only has two, this resulted in a problem which was solved by installing an NXZT Internal USB Hub.
I also added Phanteks Halos to my AIO fans, that was covered in a previous post here.
The final change was the switching out of the MSI Gaming X GTX 1080 with the Zotac RTX 2080 Amp Extreme.
The only additional change that might happen in the short term is the addition of a PSU shroud.
Now that we have covered the PC let us get back to the rest of the desk.
The photo above shows that on each side of the primary monitor there is a speaker, they are Samson studio monitors, the MediaOne BT3. The microphone I use can be seen on top of one of the speakers, the Samson Meteor USB Studio Microphone. And the webcam used is the Razer Kiyo, which is set up on top of the primary monitor.
On the back of both the monitors and desk, RGB strips have been mounted and the remote to control them is stored in a custom 3D printed housing under the desk.
Various figures decorate my desk, most of them made by Funko, but some were 3D printed.
From a peripheral perspective, I use the Corsair K70 MK2 mechanical keyboard and Razer Mamba Tournament Edition mouse (although I am considering replacing the Razer Mamba TE with the new Corsair IronClaw Wireless RGB mouse). Both the keyboard and mouse are on top of the Razer Goliathus Extended Speed Edition Mouse Pad. For a controller, I use an Xbox One controller, the Volcano Shadow Special Edition, which is kept out of the way when not in use by Vault Boy.
I use two headphones, one Wireless Gaming Headset, the Corsair HS70, and one wired professional studio headphones, the Samson Z55. I have a Silicon Headphone Anker under the desk to store these headphones when they are not in use.
I store a precision screwdriver set under the primary monitor for easy access, the Xiaomi Wiha Precision Aluminum Screwdriver set.
My VR Headset and controller are stored on top of the pc case, it is the Lenovo Explorer Windows Mixed Reality Headset. This was covered in a post here.
I have 3D printed a cable box, for easier access when plugging in the VR Headset.
Lastly, behind the second monitor is where my 3D Printer is located, the Wanhao i3 Mini.